Automaker Starter Hair Pin Forming Electric Car Conductor Winding Machine WIND-AWF
(1) Application:
Electric car, Auto industry, Aircraft, New Energy Car Drive Motor,Truck Flat wire,
In the use of electric vehicles for automakers.
(2) Advantages:
| New energy motor Hairpin cycle time | About 4 to 5seconds per root (Wire length 300mm) |
| Feeding length | Controlled by servo motor, adjustable |
| Hairpin forming process | Flat wire straighten, plane enamelled remove, side enamel remove, automatic vacuum cleaner, servo feeding, detection, cut and forming |
(3) Parameter:
Power Supply Voltage: 3Φ-380V±10% 50H
Air source Pressure: 0.5~0.7Mpa
Varnish Removing Length: 0~50mm
Wire Feeding Length: 150~400mm
Cycle time: 6s' to 8s' for 300mm length
Wire size handled: 3*8mm
(4) Configuration:
Machine working process
The machine can automatically form the hairpin with below process continuously,
Automatic Wire dereeling→ Wire feeding→ Wire straightener → Press wire →
Side enamel remover → Wire width enamel remover → Pull wire→Wire cutting
→Side chamfer with Air-hydraulic booster
→ Wire bend→ Splitting forming wire → unloading,
Output : around 3s’ to 5s’ per piece (according to hairpin length)
1). Automatical wire dereeling device
2). Wire straighten mechanism,
Comprised of X,Y direction two set Guide wheel straightening
And cylinder, the cylinder pull wire to straighten it.
3). Wire feeding mechanism
Servo motor Delta drive the wire feeding module to feed the wire,
the wire feeding length can be setted on screen,
and Max. Wire feeding length is 500mm
4). Enamel remover mechanism
The enamel remover is comprised of two structures,
Side enamel remover and width enamel remover
Two structure used 2sets of diamond grinding wheel driven by motor
to scratch off the enamels on the side and width
can control/limit the scratch depth
The Enamel remover function can be On/Off on touch screen.
5). Cutting mechanism
Cutting mechanism consist of press wire and cut wire device,
Before cutting, press wire cylinder and press tooling press the wire to prevent it move,
And then cut the wire with four cutters, at same can remove burr if occur
. After cutting, chamfer the side with Air-hydraulic booster
6). Wire splitting mechanism
Comprised of press wire device driven by cylinder and splitting system
After forming, unloading the hairpin automatically when cylinder return.
Delta servo motor
Weinveiw touch screen
Airtac cylinder
Weight: about 850Kg
Machine dimension: 1,800mm x 750 mm x 1800mm3
Machine and wire dereeling device shall have 3000mm distance
Please click below link to view video
https://youtu.be/9BYoaP7q06I
Motor manufacturer of starter inspect armature coil hair pin winding machine WIND-AWF before delivery,
Hair pin winding machine ready for starter armature hairpin forming production
|
|
Automaker Starter Hair Pin Forming Electric Car Conductor Winding Machine 10MT Bare Coated Or Coated Images
|
